# Design your own phone case insert: free, print at home

**Short answer:** you can design your own phone case without ordering a printed one. Pick your phone in the free [insert maker](https://phonecaseinserts.com/create), add a photo, a name, stickers or a drawing, print it at true size on ordinary paper and slide it behind a clear case you already own.

By [Matt Warcholinski](https://phonecaseinserts.com/author) · Published 14 November 2026 · 9 min read

A clear phone case on a cream table holding a pastel floral paper insert, with scissors, a pencil and a printed sheet of designs beside it

Illustration: designing a phone case insert at home.

**Key takeaways**

- Designing your own case at home means designing an **insert**: a paper picture cut to your phone’s exact size and placed behind a clear case.
- You need a clear case, your exact phone model, a printer and scissors. The maker is free and the design stays in your browser.
- Keep the main subject out of the camera corner, print at 100% (Actual size) and check the 5 cm ruler.
- Photos need enough pixels: about 846 × 1743 pixels for an iPhone 16 at 300 pixels per inch (our working figure, not a standard).
- A shop-printed case is more durable and needs no clear case. An insert is free, instant and swappable.

On this page

1. [Three ways to design your own phone case](https://phonecaseinserts.com/design-your-own-phone-case#three-ways-to-design-your-own-phone-case)
2. [What you need](https://phonecaseinserts.com/design-your-own-phone-case#what-you-need)
3. [Design it in five steps](https://phonecaseinserts.com/design-your-own-phone-case#design-it-in-five-steps)
4. [Pick a starting point](https://phonecaseinserts.com/design-your-own-phone-case#pick-a-starting-point)
5. [Keep the design clear of the camera](https://phonecaseinserts.com/design-your-own-phone-case#keep-the-design-clear-of-the-camera)
6. [Design tips that make it look good](https://phonecaseinserts.com/design-your-own-phone-case#design-tips-that-make-it-look-good)
7. [Five mistakes to avoid](https://phonecaseinserts.com/design-your-own-phone-case#five-mistakes-to-avoid)
8. [A first project in 15 minutes](https://phonecaseinserts.com/design-your-own-phone-case#a-first-project-in-15-minutes)
9. [Check it fits and works](https://phonecaseinserts.com/design-your-own-phone-case#check-it-fits-and-works)
10. [Make it a gift](https://phonecaseinserts.com/design-your-own-phone-case#make-it-a-gift)
11. [Insert or custom printed case: which is right for you?](https://phonecaseinserts.com/design-your-own-phone-case#insert-or-custom-printed-case-which-is-right-for-you)
12. [Questions](https://phonecaseinserts.com/design-your-own-phone-case#questions)
13. [Sources](https://phonecaseinserts.com/design-your-own-phone-case#sources)

## Three ways to design your own phone case

“Design your own phone case” usually means one of three things. This table is our own summary of how they differ; we have not compared prices or delivery times, because they vary by shop.

| Way | What you make | What you need | Can you change it? | Good to know |
| --- | --- | --- | --- | --- |
| **Order a custom printed case** | A case with your design printed on it | An online design tool, payment and delivery time | No, you order a new one | Probably tougher than paper (we have not tested either); you pay for the case and wait for it |
| **Print an insert for a clear case** | A paper design that sits behind the clear back | A clear case, a printer and paper, scissors | Yes, in a minute | Free and instant; paper can wrinkle or fade, see the tips below |
| **Decorate the case itself** | Stickers, marker or paint on the case | Stickers or pens | Hard to undo | Fast, but paint and marker may wear or smudge |

This page is about the middle way, because it is the one you can finish today with things you already own.

## What you need

- **A clear phone case** that fits your phone. If you are unsure whether your case works, read [how to make a phone case insert](https://phonecaseinserts.com/diy/how-to-make-a-phone-case-insert).
- **Your exact phone model.** Variants differ by millimetres: find your size on the [template pages](https://phonecaseinserts.com/templates) or in the [size table](https://phonecaseinserts.com/phone-case-insert-size).
- **A printer and paper.** Plain paper is fine; photo paper makes colors richer. See the [paper guide](https://phonecaseinserts.com/diy/best-paper-for-phone-case-inserts).
- **Scissors** and, for round lenses, a hole punch.

## Design it in five steps

Diagram: the five steps from an empty page to a finished insert.

1. **Pick your phone.** Open the [insert maker](https://phonecaseinserts.com/create) and choose your model. The page is then drawn at your phone’s exact size, with the camera window marked. No model listed? Measure your case with our [measuring guide](https://phonecaseinserts.com/diy/measure-clear-phone-case) and use a custom size.
2. **Choose a starting point.** Open a free design, upload a photo, search free photos or start from a blank page. The table below shows which tool fits which idea.
3. **Make it yours.** Add a name, stickers or a drawing. Move and zoom the picture until the part you like sits where you want it.
4. **Check the camera area.** Look at the marked window. Anything under it is cut out. More in the next section.
5. **Print and cut.** Download the PDF, print at Actual size, check the 5 cm ruler, cut the outline and the camera window, and slide it in. See [how to print at 100%](https://phonecaseinserts.com/diy/print-phone-case-insert-at-100-percent).

## Pick a starting point

| If you want… | Start here |
| --- | --- |
| A ready-made look (aesthetic, cottagecore, coquette, Y2K, nature, minimal, kids) | The style galleries: [aesthetic](https://phonecaseinserts.com/ideas/aesthetic), [cottagecore](https://phonecaseinserts.com/ideas/cottagecore), [coquette](https://phonecaseinserts.com/ideas/coquette), [Y2K](https://phonecaseinserts.com/ideas/y2k), [nature](https://phonecaseinserts.com/ideas/nature), [minimal](https://phonecaseinserts.com/ideas/minimal), [kids](https://phonecaseinserts.com/ideas/kids) |
| One favourite photo | The [photo insert maker](https://phonecaseinserts.com/photo-phone-case-insert), with filters and a crop that avoids the camera |
| Several photos in a grid | The [collage maker](https://phonecaseinserts.com/phone-case-collage-maker) (2 to 6 photos) |
| A name or monogram | The [personalized insert maker](https://phonecaseinserts.com/personalized-phone-case-insert-maker) |
| Photocards or tickets | The [photocard maker](https://phonecaseinserts.com/photocard-phone-case-insert-maker) |
| Your own drawing | A blank template and our [drawing ideas](https://phonecaseinserts.com/phone-case-drawing) |
| A coloring page | The [coloring pages](https://phonecaseinserts.com/coloring-pages), or turn a photo into outlines with [photo to coloring page](https://phonecaseinserts.com/photo-to-coloring-page) |
| Stickers cut from a sheet | The [sticker sheet maker](https://phonecaseinserts.com/phone-case-sticker-sheet-maker) |
| A matching lock screen | The [wallpaper and insert maker](https://phonecaseinserts.com/phone-case-insert-wallpaper-maker) |

Want to see the idea on a phone before you print? The free [phone case mockup maker](https://phonecaseinserts.com/phone-case-mockup-maker) shows it on an iPhone, Galaxy or Pixel and saves a PNG.

Three phones side by side in pastel designs: flowers, a rolling-hills landscape and a pink background with a small heart

Illustration: three different designs to start from.

## Keep the design clear of the camera

Every phone has a camera area that becomes a hole in the paper. The maker marks it, but it helps to plan for it from the start. The diagram shows the idea: a small safe margin inside the edge, a camera corner to leave empty, and the main picture below it.

Diagram: where to put the picture so the camera hole does not cut it.

For example, the iPhone 16 insert is 71.6 × 147.6 mm and its camera window is an approximate 20 × 38 mm in the top corner, according to its [template page](https://phonecaseinserts.com/templates/iphone/iphone-16). Other phones differ; the [camera hole template](https://phonecaseinserts.com/phone-case-camera-hole-template) prints the window at true size so you can check it against your case.

## Design tips that make it look good

### Use enough pixels

A small or blurry photo prints soft. As a working rule we use about 300 pixels per inch at print size: the iPhone 16 insert at that density is about 846 × 1743 pixels (the figures come from our [size table](https://phonecaseinserts.com/phone-case-insert-size)). That is a rule of thumb, not a standard. Wikipedia explains the difference between the two numbers people mix up: PPI describes the pixels in an image file, while DPI describes the dots a printer lays down. To test a photo, use the free [photo resolution checker](https://phonecaseinserts.com/phone-case-insert-photo-resolution-checker); nothing is uploaded.

### Expect colors to shift a little

Screens make colors with light and printers with ink, and the two cannot show exactly the same range (a device reproduces only part of the visible colors; see [Wikipedia: Gamut](https://en.wikipedia.org/wiki/Gamut)). Wikipedia’s CMYK article makes the same point: a color visible on one may not be reproducible on the other. In practice, very bright neon and deep saturated blues may print duller than on screen. Print a test on plain paper before you use your good paper.

### Choose paper for the look you want

Matte paper gives a soft, card-like look; glossy photo paper makes colors pop. Very thick card can make the case hard to close. Our [paper guide](https://phonecaseinserts.com/diy/best-paper-for-phone-case-inserts) covers thickness and finish.

### Mind the edges

Cut just inside the line so no white edge shows, and keep text a few millimetres away from the border. If the paper bends in the case, use the Fit setting in the maker or a custom size.

## Five mistakes to avoid

1. **Printing with “Fit to page”.** The printer shrinks the sheet and the insert comes out too small. Choose Actual size and check the 5 cm ruler on the printout.
2. **Using the wrong model.** Two phones from the same brand can differ by a millimetre or two. Check the model name in your phone’s settings before you pick it in the maker.
3. **Putting the best part under the camera.** Faces, names and logos belong below the camera window, not in its corner.
4. **Starting with a tiny photo.** A picture saved from a chat app is often small and prints soft. Use the original file, or the resolution checker first.
5. **Printing on very thick card.** The case may not close, or it may bulge. Plain or photo paper is usually enough.

## A first project in 15 minutes

If you want to try it once before you decide, here is a simple plan. It uses only free parts of the site and one sheet of paper.

1. Open the [insert maker](https://phonecaseinserts.com/create) and pick your phone (1 minute).
2. Choose a free design from the gallery that matches your mood, for example a floral or a plain pastel (2 minutes).
3. Add your initials with the text tool and move them below the camera window (3 minutes).
4. Download the PDF, print one copy on plain paper at Actual size and check the ruler (3 minutes).
5. Cut the outline and the camera window, slide the paper into the clear case and look at it in daylight (5 minutes).

If you like it, print the next one on photo paper. If something is off, change one thing in the maker and print again; a spare sheet costs very little.

## Check it fits and works

- **Size:** hold the cut insert against the back of the phone before sliding it in. If it is off, see [what to do when an insert doesn’t fit](https://phonecaseinserts.com/diy/phone-case-insert-doesnt-fit).
- **Wireless charging:** avoid foil or metallic paper, and see our [MagSafe guide](https://phonecaseinserts.com/diy/magsafe-clear-case-inserts) for what Apple says and a simple test.
- **Yellowing:** an older clear case can tint the paper behind it; see [clear cases that don’t yellow](https://phonecaseinserts.com/diy/clear-phone-cases-that-dont-yellow).

## Make it a gift

A custom design is an easy gift: find out the other person’s exact phone model, choose a photo or message that matters to them and give the insert in a clear case. Our [gift ideas](https://phonecaseinserts.com/ideas/phone-case-insert-gift-ideas) have ten options, and the [couple photo ideas](https://phonecaseinserts.com/ideas/couple-photo-phone-case-ideas) and [photocard ideas](https://phonecaseinserts.com/ideas/photocard-phone-case-insert-ideas) cover the most common ones. If you want to gather pressed flowers or similar keepsakes instead, see the [pressed flower guide](https://phonecaseinserts.com/ideas/pressed-flower-phone-case-insert).

## Insert or custom printed case: which is right for you?

- **Choose an insert** if you want it free and now, want to change the design often, or already own a clear case you like.
- **Choose a custom printed case** if you want the design on the case itself, need something that survives rough use or want a case that is not clear. You will pay for it and wait for delivery.
- **Do both:** some people use a shop-printed case for daily use and an insert for special occasions.

## Questions

Can I design my own phone case for free?

Yes, as an insert. The maker, the designs and the print file are free for personal use, and you only pay for paper and ink. You do need a clear case.

Do I need to sign up or install anything?

No. The maker runs in your browser. Photos you upload from your device stay in your browser. Photo search and pasted image links go through our server; see the [privacy page](https://phonecaseinserts.com/privacy).

What if my phone is not on the list?

Measure the inside of your case and enter a custom size. Our [measuring guide](https://phonecaseinserts.com/diy/measure-clear-phone-case) and the [insert size checker](https://phonecaseinserts.com/phone-case-insert-size-checker) help with the numbers.

Will the design look as good as a printed case?

It looks like a picture behind clear plastic and is easy to swap. It is paper, so a printed case is probably tougher; we have not tested either.

Can I sell cases or inserts made this way?

The designs and tools are free for personal use. Selling is outside what this guide covers; read our [terms](https://phonecaseinserts.com/terms#designs) before you do.

How long does the insert last?

Paper can wrinkle, fade in strong sun or get damp, so replace it when it looks tired. A fresh print takes a few minutes.

**What this guide does not cover**We have not compared the price, quality or delivery time of any custom case shop, so the table above is a general comparison, not a test. The 15 to 20 minute timing and the 300 pixels per inch figure are our own estimates. We have not tested every phone and every clear case, and colors vary by printer and paper.

## Sources

1. [Wikipedia: Dots per inch](https://en.wikipedia.org/wiki/Dots_per_inch) (difference between PPI for image files and DPI for printers).
2. [Wikipedia: CMYK color model](https://en.wikipedia.org/wiki/CMYK_color_model) (screens and printers do not share the same range of colors; no universal conversion).
3. [Wikipedia: Gamut](https://en.wikipedia.org/wiki/Gamut) (a device can reproduce only part of the visible colors).
4. Sizes: the [insert size table](https://phonecaseinserts.com/phone-case-insert-size) and the [iPhone 16 template page](https://phonecaseinserts.com/templates/iphone/iphone-16), based on each manufacturer’s published dimensions.

## Find the template for your phone

Every guide works best with a true-size template for your exact model: [iPhone templates](https://phonecaseinserts.com/templates/iphone), [Samsung Galaxy templates](https://phonecaseinserts.com/templates/samsung), [Google Pixel templates](https://phonecaseinserts.com/templates/google-pixel), [iPad templates](https://phonecaseinserts.com/templates/ipad), or [all phone models](https://phonecaseinserts.com/templates). Then open the [insert maker](https://phonecaseinserts.com/create) to print it.

## More guides

### Printable vs bought phone case inserts

Free printable or bought insert: price, fit and quality.

### Phone case template: paper insert, sublimation or mockup?

Three kinds of phone case template and which one you need.

### iPhone size comparison: 34 models, 7 drawn to scale

iPhone sizes from the X to the 17 Pro Max, with seven drawn to scale.

---

Source: https://phonecaseinserts.com/design-your-own-phone-case
Agent index: https://phonecaseinserts.com/llms.txt
