# Phone case insert glossary

**Short answer:** this glossary explains 76 words you meet when you make a paper insert for a clear phone case, from *camera cutout* and *corner radius* to *DPI*, *bleed* and *sublimation*, each in a few plain sentences.

By [Matt Warcholinski](https://phonecaseinserts.com/author) · Published 15 November 2026 · 12 min read

Index cards with simple drawings of a phone case, a ruler, scissors and a printer laid out like a dictionary

Illustration: a glossary of phone case insert terms.

**How to use this page**

- Terms are grouped by what you are doing: fitting the case, printing, working with files, cutting, and the ways cases are made.
- Four terms have a full page because they need more than a few sentences: [dieline](https://phonecaseinserts.com/glossary/dieline), [bleed](https://phonecaseinserts.com/glossary/bleed), [DPI](https://phonecaseinserts.com/glossary/dpi) and [mockup](https://phonecaseinserts.com/glossary/mockup).
- Sizes on this site are in millimeters. One inch is exactly 25.4 mm.

On this page

1. [The case and the fit](https://phonecaseinserts.com/glossary#the-case-and-the-fit)
2. [Printing](https://phonecaseinserts.com/glossary#printing)
3. [Files and design](https://phonecaseinserts.com/glossary#files-and-design)
4. [Cutting and making](https://phonecaseinserts.com/glossary#cutting-and-making)
5. [How other cases are made](https://phonecaseinserts.com/glossary#how-other-cases-are-made)
6. [Insert styles and ideas](https://phonecaseinserts.com/glossary#insert-styles-and-ideas)
7. [Frequently asked questions](https://phonecaseinserts.com/glossary#frequently-asked-questions)
8. [Related](https://phonecaseinserts.com/glossary#related)

All 76 terms, A to Z

[Aspect ratio](https://phonecaseinserts.com/glossary#aspect-ratio) · [Blank case](https://phonecaseinserts.com/glossary#blank-case) · [Bleed](https://phonecaseinserts.com/glossary#bleed) · [Button cutout](https://phonecaseinserts.com/glossary#button-cutout) · [Camera cutout](https://phonecaseinserts.com/glossary#camera-cutout) · [Camera module](https://phonecaseinserts.com/glossary#camera-module) · [Cardstock](https://phonecaseinserts.com/glossary#cardstock) · [Case window](https://phonecaseinserts.com/glossary#case-window) · [Clear case](https://phonecaseinserts.com/glossary#clear-case) · [Collage](https://phonecaseinserts.com/glossary#collage) · [Coloring insert](https://phonecaseinserts.com/glossary#coloring-insert) · [Coquette](https://phonecaseinserts.com/glossary#coquette) · [Corner radius](https://phonecaseinserts.com/glossary#corner-radius) · [Cottagecore](https://phonecaseinserts.com/glossary#cottagecore) · [Craft knife](https://phonecaseinserts.com/glossary#craft-knife) · [Crop marks](https://phonecaseinserts.com/glossary#crop-marks) · [Custom size](https://phonecaseinserts.com/glossary#custom-size) · [Cut line (trim line)](https://phonecaseinserts.com/glossary#cut-line) · [Cutting machine](https://phonecaseinserts.com/glossary#cutting-machine) · [Cutting mat](https://phonecaseinserts.com/glossary#cutting-mat) · [Dieline](https://phonecaseinserts.com/glossary#dieline) · [DPI](https://phonecaseinserts.com/glossary#dpi) · [DTF](https://phonecaseinserts.com/glossary#dtf) · [Fit](https://phonecaseinserts.com/glossary#fit) · [Fit setting](https://phonecaseinserts.com/glossary#fit-setting) · [Fit to page](https://phonecaseinserts.com/glossary#fit-to-page) · [Glossy photo paper](https://phonecaseinserts.com/glossary#glossy-paper) · [gsm (paper weight)](https://phonecaseinserts.com/glossary#gsm) · [Heat press](https://phonecaseinserts.com/glossary#heat-press) · [Hole punch](https://phonecaseinserts.com/glossary#hole-punch) · [Hybrid case](https://phonecaseinserts.com/glossary#hybrid-case) · [Inkjet printer](https://phonecaseinserts.com/glossary#inkjet) · [Insert size](https://phonecaseinserts.com/glossary#insert-size) · [JPG (JPEG)](https://phonecaseinserts.com/glossary#jpg) · [Kawaii](https://phonecaseinserts.com/glossary#kawaii) · [Laser printer](https://phonecaseinserts.com/glossary#laser-printer) · [Layer](https://phonecaseinserts.com/glossary#layer) · [Lip](https://phonecaseinserts.com/glossary#lip) · [MagSafe](https://phonecaseinserts.com/glossary#magsafe) · [Matching wallpaper](https://phonecaseinserts.com/glossary#wallpaper-match) · [Matte paper](https://phonecaseinserts.com/glossary#matte-paper) · [Millimeter and inch](https://phonecaseinserts.com/glossary#millimeter) · [Mockup](https://phonecaseinserts.com/glossary#mockup) · [Paper trimmer](https://phonecaseinserts.com/glossary#paper-trimmer) · [PDF](https://phonecaseinserts.com/glossary#pdf) · [Phone case insert](https://phonecaseinserts.com/glossary#phone-case-insert) · [Photocard](https://phonecaseinserts.com/glossary#photocard) · [Pixel](https://phonecaseinserts.com/glossary#pixel) · [PNG](https://phonecaseinserts.com/glossary#png) · [Polycarbonate](https://phonecaseinserts.com/glossary#polycarbonate) · [PPI](https://phonecaseinserts.com/glossary#ppi) · [Pressed flower insert](https://phonecaseinserts.com/glossary#pressed-flower) · [Print at 100% (actual size)](https://phonecaseinserts.com/glossary#print-at-100) · [Print on demand](https://phonecaseinserts.com/glossary#print-on-demand) · [Printable area](https://phonecaseinserts.com/glossary#printable-area) · [Raster](https://phonecaseinserts.com/glossary#raster) · [Resolution](https://phonecaseinserts.com/glossary#resolution) · [RGB and CMYK](https://phonecaseinserts.com/glossary#rgb-cmyk) · [Safe zone](https://phonecaseinserts.com/glossary#safe-zone) · [Scaling](https://phonecaseinserts.com/glossary#scaling) · [Scoring](https://phonecaseinserts.com/glossary#scoring) · [Sticker sheet](https://phonecaseinserts.com/glossary#sticker-sheet) · [Sublimation](https://phonecaseinserts.com/glossary#sublimation) · [SVG](https://phonecaseinserts.com/glossary#svg) · [Swappable insert](https://phonecaseinserts.com/glossary#swappable-insert) · [Template](https://phonecaseinserts.com/glossary#template) · [Test print](https://phonecaseinserts.com/glossary#test-print) · [TPU](https://phonecaseinserts.com/glossary#tpu) · [Transfer paper](https://phonecaseinserts.com/glossary#transfer-paper) · [Transparent background](https://phonecaseinserts.com/glossary#transparent-background) · [True size](https://phonecaseinserts.com/glossary#true-size) · [UV printing](https://phonecaseinserts.com/glossary#uv-printing) · [Vector](https://phonecaseinserts.com/glossary#vector) · [Wireless charging](https://phonecaseinserts.com/glossary#wireless-charging) · [Y2K](https://phonecaseinserts.com/glossary#y2k) · [Yellowing](https://phonecaseinserts.com/glossary#yellowing)

## The case and the fit

**Phone case insert**

A flat sheet of paper or card that slides behind the clear back of a phone case. It is the part you design and swap.

**Clear case**

A phone case with a see-through back. Any design placed between the case and the phone shows through it. Some clear cases have a shallow recess for the insert.

**Case window**

The see-through area of the case back. The insert has to match the window, not the phone, so a case with a thick rim needs a smaller insert. See [how to measure a clear case](https://phonecaseinserts.com/diy/measure-clear-phone-case).

**Insert size**

The width and height of the insert in millimeters. It starts from the phone's back and is then adjusted to the case window. Look yours up in the [insert size table](https://phonecaseinserts.com/phone-case-insert-size) or the [template for your phone](https://phonecaseinserts.com/templates).

**Fit**

How well the insert sits in the case. A tight insert bends and shows ripples, a loose one slides and shows a gap. If yours is off, read [when an insert does not fit](https://phonecaseinserts.com/diy/phone-case-insert-doesnt-fit).

**Fit setting**

A setting in the insert maker that prints the insert 1 or 2 mm smaller, for cases whose window is smaller than the phone.

**Camera cutout**

The hole in the insert that lets the phone's lenses see through. It is also called the camera hole or camera window. Our templates mark it, and the [camera hole template](https://phonecaseinserts.com/phone-case-camera-hole-template) lets you check it against your own case.

**Camera module**

The raised block or plate on the back of a phone that holds the lenses. Its shape sets the shape of the cutout. It can be a square, a pill, a bar across the top or a column of separate lenses.

**Corner radius**

How round the corners are, measured in millimeters. The cut line follows the radius of the phone, so a square-cornered insert will catch in a rounded case.

**Lip**

The raised rim around the back opening of a case. It shrinks the usable window, so the insert may need to be a little smaller than the phone.

**Button cutout**

An opening in the case side for a button or port. It matters for the case, not for the insert, which sits behind the back and never reaches the sides.

**TPU**

Thermoplastic polyurethane: a flexible, slightly soft plastic used for many clear cases. Clear TPU can turn yellow with time, and the [guide to clear cases that do not yellow](https://phonecaseinserts.com/diy/clear-phone-cases-that-dont-yellow) goes into it.

**Polycarbonate**

A hard, clear plastic used for rigid case backs. It is often combined with a softer rim, which gives a hybrid case.

**Hybrid case**

A case made of a hard clear back and a soft frame. The hard back keeps the insert flat, and the frame absorbs knocks.

**Yellowing**

The slow change of a clear case from clear to yellow. A yellowed case tints whatever is behind it, so a white insert can look cream.

**MagSafe**

Apple's system of magnets in the back of newer iPhones that holds chargers and accessories in place. A MagSafe case has its own magnets, so keep metal such as foil away from the magnet ring. See [MagSafe clear case inserts](https://phonecaseinserts.com/diy/magsafe-clear-case-inserts).

**Wireless charging**

Charging by placing the phone on a pad, with no cable. Thick or metal material between phone and charger can interfere, so keep the insert to a single thin sheet of paper.

**Swappable insert**

An insert you replace when you want a new look, without changing the case.

## Printing

**Print at 100% (actual size)**

A print setting that keeps the file at its real size. The insert is only the right size when you choose it. Steps: [print at 100%](https://phonecaseinserts.com/diy/print-phone-case-insert-at-100-percent).

**Fit to page**

A print setting that shrinks or enlarges the file to fill the sheet. It is a common reason an insert comes out too small, so turn it off.

**Scaling**

Changing the printed size of a file by a percentage. Any value other than 100% changes the size of your insert.

**Test print**

A cheap first print used to check size before you use good paper. Our [print test](https://phonecaseinserts.com/print-test) has 10 cm bars you can measure with a ruler.

**DPI**

Dots per inch: how many dots of ink a printer places in one inch. More dots mean finer detail. Often used when people mean PPI. Full page: [what is DPI](https://phonecaseinserts.com/glossary/dpi).

**PPI**

Pixels per inch: how many pixels of an image fall in one inch when it is printed or shown. It describes the picture, while DPI describes the printer.

**Resolution**

The number of pixels in a picture, such as 3000 by 2400. It decides how large the picture can print before it looks soft. The [photo resolution checker](https://phonecaseinserts.com/phone-case-insert-photo-resolution-checker) tests yours.

**Pixel**

The smallest square of color in a digital picture. A pixel has no physical size until the picture is printed or shown at a set PPI.

**Aspect ratio**

The relationship between width and height. An iPhone 15 insert is 71.6 by 147.6 mm, about 1 to 2.06. A photo with a different ratio has to be cropped to fill it.

**Bleed**

Extra artwork that runs past the cut line so no white edge shows after trimming. Full page: [what is bleed](https://phonecaseinserts.com/glossary/bleed).

**Cut line (trim line)**

The line you cut along. On our templates it is the orange dashed outline of the insert.

**Safe zone**

The area inside the edges that stays clear of trimming and corners. Keep text and faces inside it.

**Crop marks**

Small lines in the corners of a sheet that show where to cut. A print shop uses them. Our inserts use one dashed line all the way round instead.

**Dieline**

A flat outline that shows where a printed piece is cut, folded or perforated. For a phone case insert it is the outline with the camera cutout. Full page: [what is a dieline](https://phonecaseinserts.com/glossary/dieline).

**Printable area**

The part of a sheet the printer can reach. Many home printers leave a thin unprinted margin at the edge, so artwork placed there can be clipped. Check it with a test print.

**gsm (paper weight)**

Grams per square meter, a measure of paper weight. A higher number means heavier, stiffer paper. See [the best paper for inserts](https://phonecaseinserts.com/diy/best-paper-for-phone-case-inserts).

**Matte paper**

Paper with a flat, non-shiny surface. It reduces glare behind a clear case.

**Glossy photo paper**

Paper with a shiny coating that gives deep color for photos. It also shows more reflections behind a clear case than matte paper does.

**Cardstock**

Thick, stiff paper. It keeps an insert flat, but a very thick sheet can make the case bulge or stop it closing.

**Inkjet printer**

A printer that sprays tiny drops of liquid ink onto paper. It is the usual home printer for photo inserts.

**Laser printer**

A printer that fuses powder toner onto paper with heat. It prints sharp text and graphics, and the result is less likely to smudge than inkjet.

**RGB and CMYK**

Two ways of describing color. RGB (red, green, blue) is for screens. CMYK (cyan, magenta, yellow, black) is for ink. A printed color rarely matches the screen exactly. Most home printers take RGB files, so you usually do not need to convert.

## Files and design

**Template**

A true-size outline of the back of a phone, with the cut line and camera cutout, that you print and use as the base of an insert. Get one for [your phone](https://phonecaseinserts.com/templates) or take the [free template pack](https://phonecaseinserts.com/free-phone-case-template-pack).

**Mockup**

A picture that shows a design on a phone or case. It is for looking at, not for printing at true size. Full page: [what is a mockup](https://phonecaseinserts.com/glossary/mockup).

**True size**

A file made at the real physical size of the insert, in millimeters, so it prints at 100% with no resizing.

**Custom size**

A page size you type in yourself. Use it in a design app when your case is not on our list. A walk-through for Canva is in [phone case template in Canva](https://phonecaseinserts.com/diy/phone-case-template-canva).

**PNG**

A picture format that keeps sharp edges and can have a transparent background. Our PNG templates are sized at 300 pixels per inch.

**JPG (JPEG)**

A picture format made for photos. It makes small files by dropping some detail, and it cannot be transparent.

**PDF**

A file format that keeps page size and layout the same on every device. It is the best format for printing a true-size insert.

**SVG**

A vector picture format that scales without losing sharpness. Our SVG templates are drawn in millimeters with separate cut-line and camera-cutout groups.

**Vector**

Artwork made of lines and shapes described by numbers, so it stays crisp at any size. Outlines and logos are usually vector.

**Raster**

Artwork made of a grid of pixels, such as a photo. It gets blurry when enlarged past its pixel count.

**Transparent background**

A picture with no background color, so what is behind it shows through. PNG and SVG can have one, JPG cannot.

**Layer**

A level in a design app that holds one part of a design. Put a template on its own layer above your artwork and hide it before you export.

**Millimeter and inch**

Phone sizes are given in millimeters. One inch is 25.4 mm. At 300 dpi, one millimeter is about 11.8 pixels.

### Which file format for which job

| Format | Best for | Transparent |
| --- | --- | --- |
| PDF | Printing a true-size sheet | Can be |
| PNG | A template layer or a graphic in a design app | Yes |
| SVG | Outlines in vector tools | Yes |
| JPG | Photos | No |

## Cutting and making

**Craft knife**

A small knife with a replaceable blade, used for clean cuts and tight corners. Cut on a mat and keep fingers behind the blade.

**Hole punch**

A tool that cuts a round hole in one press. It suits round camera lenses, and a single punch can be reused on every insert. See [how to cut the camera hole](https://phonecaseinserts.com/diy/how-to-cut-the-camera-hole).

**Cutting mat**

A flat, tough board that protects the table and gives a blade something firm to cut against. Many have a printed grid for measuring.

**Paper trimmer**

A tool with a sliding blade that cuts straight lines. It is good for straight edges and less useful for rounded corners.

**Scoring**

Pressing a line into paper without cutting through, so it folds cleanly. An insert is flat and does not need it, but folded cards and boxes do.

**Cutting machine**

A machine that cuts shapes from a file with a small blade. It follows a vector outline, so an SVG could serve as the cut path. We have not tested ours with a cutting machine, so check the size after importing.

## How other cases are made

**Sublimation**

A printing method where dye is transferred by heat into a polyester-coated surface. It makes a design that is part of the case, so it cannot be swapped. See [paper insert vs sublimation](https://phonecaseinserts.com/diy/paper-insert-vs-sublimation-phone-case-template).

**Heat press**

A machine that applies heat and even pressure to a transfer. It is used for sublimation and other transfer methods.

**Transfer paper**

Special paper that holds a printed design until heat moves it onto the final item.

**Blank case**

A case made without a design, ready for printing. Sublimation blanks have a coating that takes the dye. A clear case for inserts is a different product.

**DTF**

Direct to film: a design is printed on a plastic film, covered with adhesive powder and pressed onto the item with heat.

**UV printing**

A method that prints with ink that dries under ultraviolet light, directly on the surface of the case.

**Print on demand**

A way of selling products that are only printed after an order arrives, so the seller keeps no stock.

## Insert styles and ideas

**Matching wallpaper**

A phone wallpaper made from the same design as the insert, so the phone and the case look planned together. The [wallpaper maker](https://phonecaseinserts.com/phone-case-insert-wallpaper-maker) makes both.

**Collage**

An insert built from several photos arranged on one sheet. See the [collage maker](https://phonecaseinserts.com/phone-case-collage-maker) and [collage ideas](https://phonecaseinserts.com/diy/phone-case-collage-ideas).

**Photocard**

A small collectible card with a photo, often from a music group. Many people place one behind a clear case, and the [photocard maker](https://phonecaseinserts.com/photocard-phone-case-insert-maker) sizes it.

**Sticker sheet**

A page of small stickers arranged to fill an insert. The [sticker sheet maker](https://phonecaseinserts.com/phone-case-sticker-sheet-maker) lays one out.

**Pressed flower insert**

A real dried flower flattened between paper and set behind the case. See [pressed flower inserts](https://phonecaseinserts.com/ideas/pressed-flower-phone-case-insert).

**Coloring insert**

A line drawing printed on an insert for you to color by hand. See [coloring pages](https://phonecaseinserts.com/coloring-pages).

**Cottagecore**

A style built around countryside life: flowers, gardens, baking and soft handmade looks.

**Coquette**

A style built around bows, ribbons, lace and pale pink.

**Kawaii**

A Japanese word for cute. In design it means round shapes, pastel colors and small smiling characters.

**Y2K**

A style that borrows from the late 1990s and early 2000s: butterflies, glitter, chrome and bright pink.

## Frequently asked questions

What is a phone case insert?

It is a flat sheet that slides behind the clear back of a phone case. You print and cut it yourself, and you can swap it whenever you like.

What does "true size" mean for a template?

The file is made at the real size of the insert in millimeters, so when you print at 100% the paper copy matches the phone.

Is a template the same as a mockup?

No. A template is an outline you print and cut. A mockup is a picture that shows a design on a phone. See [what is a mockup](https://phonecaseinserts.com/glossary/mockup).

Do I need to know about DPI and bleed?

Not for a basic insert. Print at 100% and use a sharp photo. DPI matters for photo quality, and bleed matters if you send files to a print shop. Both have their own page.

Can you add a term?

Yes. Use the [contact page](https://phonecaseinserts.com/contact) and tell us which word you could not find.

The definitions of DPI, bleed, dieline and mockup rely on the sources listed on their own pages. The other entries are general definitions in our own words.

**What this glossary does not cover**These are short, general definitions for people who make paper inserts at home. They are not technical or legal definitions, and printer and case makers sometimes use words slightly differently. Terms for sublimation, DTF and UV printing describe how the methods work in general, and we have not used those methods ourselves.

## Related

- [Insert maker](https://phonecaseinserts.com/create) and [templates for your phone](https://phonecaseinserts.com/templates).
- [Free template pack](https://phonecaseinserts.com/free-phone-case-template-pack) and [mockup maker](https://phonecaseinserts.com/phone-case-mockup-maker).
- [All free tools](https://phonecaseinserts.com/tools).

---

Source: https://phonecaseinserts.com/glossary
Agent index: https://phonecaseinserts.com/llms.txt
