# Pixel 9 Pro case insert template

The Pixel 9 Pro insert is **72 × 152.8 mm** (2.83 × 6.02 in) with 11 mm rounded corners. Print it at 100% (Actual size), check the 5 cm ruler, cut just inside the dashed line, cut out the camera window and slide it behind your clear case.

[Make my Pixel 9 Pro insert](https://phonecaseinserts.com/create?device=pixel-9-pro) [Use my own photo](https://phonecaseinserts.com/create?device=pixel-9-pro&source=upload)

## Size and cutout

| Width | 72 mm (2.83 in) |
| --- | --- |
| Height | 152.8 mm (6.02 in) |
| Corner radius | about 11 mm |
| Camera | Centred camera bar, about 52 × 17 mm, 12 mm from the top. |
| Fits on | A4 and US Letter, 2 per sheet |

Based on Google’s published phone dimensions. Clear cases differ by 1 to 2 mm between brands. If the insert bends inside your case, choose Fit: 1 mm smaller in the maker, or measure the inside of your case and use a custom size.

Insert outline at scale. Orange: cut line. Grey: camera window.

## Ready designs for Pixel 9 Pro

[All ideas](https://phonecaseinserts.com/ideas)

[Retro striped sunset over purple mountains on a phone case insert Retro sunset](https://phonecaseinserts.com/create?design=retro-sunset&device=pixel-9-pro) [Starry galaxy with a pink and purple ringed planet Galaxy night](https://phonecaseinserts.com/create?design=galaxy-night&device=pixel-9-pro) [Bright rainbow arches with little stars Rainbow arches](https://phonecaseinserts.com/create?design=rainbow-arches&device=pixel-9-pro) [Colourful balloons on strings against pale blue Balloon day](https://phonecaseinserts.com/create?design=balloon-day&device=pixel-9-pro) [Lilac and lime wavy checkerboard Y2K pattern Wavy checker](https://phonecaseinserts.com/create?design=wavy-checker&device=pixel-9-pro) [Layered mountains at dusk under a peach sky Mountain dusk](https://phonecaseinserts.com/create?design=mountain-dusk&device=pixel-9-pro)

## How to make it

1. Open the [insert maker](https://phonecaseinserts.com/create?device=pixel-9-pro). Your Pixel 9 Pro is already selected.
2. Pick a design, upload a photo or search free photos. Drag and zoom to place it.
3. Download the PDF and print at 100% on plain or photo paper.
4. Cut the outline, then the camera window ([camera-hole guide](https://phonecaseinserts.com/diy/how-to-cut-the-camera-hole)), and slide it into the case.

## Questions

What size is the Pixel 9 Pro case insert?

72 × 152.8 mm, which is 2.83 × 6.02 inches, with about 11 mm rounded corners. That is the back of the phone; most clear cases have a window this size or 1 mm smaller.

Why does my printed insert come out too small?

Your printer scaled it. Print again and choose 100%, Actual size or “No scaling” in the print dialog. The 5 cm ruler on the sheet tells you straight away if the scale is right. [Step-by-step: print at 100%](https://phonecaseinserts.com/diy/print-phone-case-insert-at-100-percent).

Will the insert block wireless or MagSafe charging?

A single sheet of normal paper does not stop wireless charging. Very thick card or anything metallic can, so avoid foil paper.

## Other Google Pixel templates

[Pixel 9](https://phonecaseinserts.com/templates/google-pixel/pixel-9) [All Google Pixel](https://phonecaseinserts.com/templates/google-pixel)

---

Source: https://phonecaseinserts.com/templates/google-pixel/pixel-9-pro
Agent index: https://phonecaseinserts.com/llms.txt