# iPad Air 11" case insert template

The iPad Air 11" insert is **178.5 × 247.6 mm** (7.03 × 9.75 in) with 18 mm rounded corners. Print it at 100% (Actual size), check the 5 cm ruler, cut just inside the dashed line, cut out the camera window and slide it behind your clear case.

[Make my iPad Air 11" insert](https://phonecaseinserts.com/create?device=ipad-air-11-inch) [Use my own photo](https://phonecaseinserts.com/create?device=ipad-air-11-inch&source=upload)

## Size and cutout

| Width | 178.5 mm (7.03 in) |
| --- | --- |
| Height | 247.6 mm (9.75 in) |
| Corner radius | about 18 mm |
| Camera | Single round lens, about 11 mm across, in the top corner. |
| Fits on | A3 (too large for A4 or Letter) |

Based on Apple’s published tablet dimensions. Clear cases differ by 1 to 2 mm between brands. If the insert bends inside your case, choose Fit: 1 mm smaller in the maker, or measure the inside of your case and use a custom size.

Insert outline at scale. Orange: cut line. Grey: camera window.

## Ready designs for iPad Air 11"

[All ideas](https://phonecaseinserts.com/ideas)

[Bright rainbow arches with little stars Rainbow arches](https://phonecaseinserts.com/create?design=rainbow-arches&device=ipad-air-11-inch) [Colourful balloons on strings against pale blue Balloon day](https://phonecaseinserts.com/create?design=balloon-day&device=ipad-air-11-inch) [Lilac and lime wavy checkerboard Y2K pattern Wavy checker](https://phonecaseinserts.com/create?design=wavy-checker&device=ipad-air-11-inch) [Layered mountains at dusk under a peach sky Mountain dusk](https://phonecaseinserts.com/create?design=mountain-dusk&device=ipad-air-11-inch) [Cute cat faces in orange, grey and cream Kitty faces](https://phonecaseinserts.com/create?design=kitty-faces&device=ipad-air-11-inch) [Blue beach stripes with starfish and shells Coastal summer](https://phonecaseinserts.com/create?design=coastal-summer&device=ipad-air-11-inch)

## How to make it

1. Open the [insert maker](https://phonecaseinserts.com/create?device=ipad-air-11-inch). Your iPad Air 11" is already selected.
2. Pick a design, upload a photo or search free photos. Drag and zoom to place it.
3. Download the PDF and print at 100% on plain or photo paper.
4. Cut the outline, then the camera window ([camera-hole guide](https://phonecaseinserts.com/diy/how-to-cut-the-camera-hole)), and slide it into the case.

## Questions

What size is the iPad Air 11" case insert?

178.5 × 247.6 mm, which is 7.03 × 9.75 inches, with about 18 mm rounded corners. That is the back of the tablet; most clear cases have a window this size or 1 mm smaller.

Why does my printed insert come out too small?

Your printer scaled it. Print again and choose 100%, Actual size or “No scaling” in the print dialog. The 5 cm ruler on the sheet tells you straight away if the scale is right. [Step-by-step: print at 100%](https://phonecaseinserts.com/diy/print-phone-case-insert-at-100-percent).

Will the insert block wireless or MagSafe charging?

A single sheet of normal paper does not stop wireless charging. Very thick card or anything metallic can, so avoid foil paper.

## Other iPad templates

[iPad (10th gen)](https://phonecaseinserts.com/templates/ipad/ipad-10th-gen) [All iPad](https://phonecaseinserts.com/templates/ipad)

---

Source: https://phonecaseinserts.com/templates/ipad/ipad-air-11-inch
Agent index: https://phonecaseinserts.com/llms.txt