# iPhone 17 Pro Max case insert template

The iPhone 17 Pro Max insert is **78 × 163.4 mm** (3.07 × 6.43 in) with 12 mm rounded corners. Print it at 100% (Actual size), check the 5 cm ruler, cut just inside the dashed line, cut out the camera window and slide it behind your clear case.

[Make my iPhone 17 Pro Max insert](https://phonecaseinserts.com/create?device=iphone-17-pro-max) [Use my own photo](https://phonecaseinserts.com/create?device=iphone-17-pro-max&source=upload)

## Size and cutout

| Width | 78 mm (3.07 in) |
| --- | --- |
| Height | 163.4 mm (6.43 in) |
| Corner radius | about 12 mm |
| Camera | Full-width camera plateau across the top, about 42 mm tall. The insert starts just below it. |
| Fits on | A4 and US Letter, 2 per sheet |

Based on Apple’s published phone dimensions. Clear cases differ by 1 to 2 mm between brands. If the insert bends inside your case, choose Fit: 1 mm smaller in the maker, or measure the inside of your case and use a custom size.

Insert outline at scale. Orange: cut line. Grey: camera window.

## Ready designs for iPhone 17 Pro Max

[All ideas](https://phonecaseinserts.com/ideas)

[White daisies scattered on a soft green background Daisy meadow](https://phonecaseinserts.com/create?design=daisy-meadow&device=iphone-17-pro-max) [Smiling cartoon fruit with leaves Fruit friends](https://phonecaseinserts.com/create?design=fruit-friends&device=iphone-17-pro-max) [Pink coquette bows on a blush background, phone case insert Coquette bows](https://phonecaseinserts.com/create?design=coquette-bows&device=iphone-17-pro-max) [Vintage topographic map lines on parchment with a compass star Vintage map](https://phonecaseinserts.com/create?design=vintage-map&device=iphone-17-pro-max) [Pink and red heart confetti on pale pink Heart confetti](https://phonecaseinserts.com/create?design=heart-confetti&device=iphone-17-pro-max) [Pastel butterflies on lilac Butterfly garden](https://phonecaseinserts.com/create?design=butterfly-garden&device=iphone-17-pro-max)

## How to make it

1. Open the [insert maker](https://phonecaseinserts.com/create?device=iphone-17-pro-max). Your iPhone 17 Pro Max is already selected.
2. Pick a design, upload a photo or search free photos. Drag and zoom to place it.
3. Download the PDF and print at 100% on plain or photo paper.
4. Cut the outline, then the camera window ([camera-hole guide](https://phonecaseinserts.com/diy/how-to-cut-the-camera-hole)), and slide it into the case.

## Questions

What size is the iPhone 17 Pro Max case insert?

78 × 163.4 mm, which is 3.07 × 6.43 inches, with about 12 mm rounded corners. That is the back of the phone; most clear cases have a window this size or 1 mm smaller.

Why does my printed insert come out too small?

Your printer scaled it. Print again and choose 100%, Actual size or “No scaling” in the print dialog. The 5 cm ruler on the sheet tells you straight away if the scale is right. [Step-by-step: print at 100%](https://phonecaseinserts.com/diy/print-phone-case-insert-at-100-percent).

Will the insert block wireless or MagSafe charging?

A single sheet of normal paper does not stop wireless charging. Very thick card or anything metallic can, so avoid foil paper.

## Other iPhone templates

[iPhone 17 Pro](https://phonecaseinserts.com/templates/iphone/iphone-17-pro) [iPhone 17](https://phonecaseinserts.com/templates/iphone/iphone-17) [All iPhone](https://phonecaseinserts.com/templates/iphone)

---

Source: https://phonecaseinserts.com/templates/iphone/iphone-17-pro-max
Agent index: https://phonecaseinserts.com/llms.txt