# iPhone 17 Pro case insert template

The iPhone 17 Pro insert is **71.9 × 150 mm** (2.83 × 5.91 in) with 11 mm rounded corners. Print it at 100% (Actual size), check the 5 cm ruler, cut just inside the dashed line, cut out the camera window and slide it behind your clear case.

[Make my iPhone 17 Pro insert](https://phonecaseinserts.com/create?device=iphone-17-pro) [Use my own photo](https://phonecaseinserts.com/create?device=iphone-17-pro&source=upload)

## Size and cutout

| Width | 71.9 mm (2.83 in) |
| --- | --- |
| Height | 150 mm (5.91 in) |
| Corner radius | about 11 mm |
| Camera | Full-width camera plateau across the top, about 40 mm tall. The insert starts just below it. |
| Fits on | A4 and US Letter, 2 per sheet |

Based on Apple’s published phone dimensions. Clear cases differ by 1 to 2 mm between brands. If the insert bends inside your case, choose Fit: 1 mm smaller in the maker, or measure the inside of your case and use a custom size.

Insert outline at scale. Orange: cut line. Grey: camera window.

## Ready designs for iPhone 17 Pro

[All ideas](https://phonecaseinserts.com/ideas)

[Soft pastel blob shapes in pink, mint and butter yellow Pastel blobs](https://phonecaseinserts.com/create?design=pastel-blobs&device=iphone-17-pro) [Layered ocean waves from pale aqua to deep blue Ocean waves](https://phonecaseinserts.com/create?design=ocean-waves&device=iphone-17-pro) [Yellow crescent moon with stars and clouds on navy Sleepy moon](https://phonecaseinserts.com/create?design=sleepy-moon&device=iphone-17-pro) [Small cottagecore flowers in rust, mustard and lilac on cream Cottagecore flowers](https://phonecaseinserts.com/create?design=cottagecore-flowers&device=iphone-17-pro) [Minimal terracotta arches and sun on warm off-white Minimal arches](https://phonecaseinserts.com/create?design=minimal-arches&device=iphone-17-pro) [Cartoon dinosaurs in green, orange, blue and purple Dino party](https://phonecaseinserts.com/create?design=dino-party&device=iphone-17-pro)

## How to make it

1. Open the [insert maker](https://phonecaseinserts.com/create?device=iphone-17-pro). Your iPhone 17 Pro is already selected.
2. Pick a design, upload a photo or search free photos. Drag and zoom to place it.
3. Download the PDF and print at 100% on plain or photo paper.
4. Cut the outline, then the camera window ([camera-hole guide](https://phonecaseinserts.com/diy/how-to-cut-the-camera-hole)), and slide it into the case.

## Questions

What size is the iPhone 17 Pro case insert?

71.9 × 150 mm, which is 2.83 × 5.91 inches, with about 11 mm rounded corners. That is the back of the phone; most clear cases have a window this size or 1 mm smaller.

Why does my printed insert come out too small?

Your printer scaled it. Print again and choose 100%, Actual size or “No scaling” in the print dialog. The 5 cm ruler on the sheet tells you straight away if the scale is right. [Step-by-step: print at 100%](https://phonecaseinserts.com/diy/print-phone-case-insert-at-100-percent).

Will the insert block wireless or MagSafe charging?

A single sheet of normal paper does not stop wireless charging. Very thick card or anything metallic can, so avoid foil paper.

## Other iPhone templates

[iPhone 17 Pro Max](https://phonecaseinserts.com/templates/iphone/iphone-17-pro-max) [iPhone 17](https://phonecaseinserts.com/templates/iphone/iphone-17) [iPhone 16 Pro Max](https://phonecaseinserts.com/templates/iphone/iphone-16-pro-max) [All iPhone](https://phonecaseinserts.com/templates/iphone)

---

Source: https://phonecaseinserts.com/templates/iphone/iphone-17-pro
Agent index: https://phonecaseinserts.com/llms.txt