Phone case camera hole template

Short answer: pick your phone and this free tool draws the camera window on a true-size insert, with its size, its distance from the left and top edges, and the line to cut along. If your case has a bigger or different opening, switch to “Measure my case’s opening” and enter it yourself. Download the PDF, print at 100% and cut. Nothing is uploaded.

By · Updated 4 November 2026

2. Where does the window come from?
4. Background
Paper

Print at 100% (Actual size), cut along the orange dashed line, then check the hole against your case. Check your printer with the printer scale test first.

Key takeaways
  • Camera positions come from our template data and are approximate. If your case opening differs, measure it and use “Measure my case’s opening”.
  • The solid orange line is where you cut. The dashed outline inside it is the camera as drawn in our data. Extra room moves the orange line outward only.
  • Phones with a full-width bar or plateau usually need no hole: the insert is cut in two pieces or stops below the camera.
  • The preview and the PDF use the same drawing at true size, with a 5 cm ruler to check your printer.

How to use the camera hole template

  1. Choose your phone. The insert outline and camera window appear at true size. Not listed? Pick the custom size and enter the inside of your case.
  2. Compare with your case. Hold the case over the screen and look at the opening. If it is bigger or placed differently, switch to “Measure my case’s opening” and enter its width, height and position.
  3. Add extra room if you want it. Leave it at none to cut on the line, or add up to 1.5 mm so the lens and flash are never covered.
  4. Print at 100%. Download the PDF, print at Actual size and check the 5 cm ruler on the sheet.
  5. Cut. Cut the outline first, then the window, using the method in the list beside the preview.

What the template shows for each camera layout

How the camera window is drawnA rounded square camera window with a dashed inner outline for the camera and a solid orange outer outline for the cut line, with arrows for the distance from the left and top edges. Solid orange lineWhere you cut (camera plus any extra room) Dashed outlineThe camera as drawn in our data ArrowsDistance from the left and top edges
Diagram: how the window is drawn on the insert. Illustration, not to scale.
Camera layoutWhat the template drawsUsual way to cut
Square or pill-shaped moduleOne rounded window with a fold-through XFold through the X, snip once, cut to the line
Separate round lensesOne small circle per lens, each with its sizeHole punch or small curved scissors
Centred islandOne long rounded slotFold and snip, then cut along the slot
Full-width barA band across the insertNo hole: use two pieces above and below the bar
Camera plateau across the topA band at the top edgeNo hole: stop the insert below the plateau
Your own measured openingThe size and position you enterFold and snip, then cut to the line

For the full cutting method, tools and fixes for a hole that is off, read how to cut the camera hole.

Frequently asked questions

How accurate is the camera window?

It is approximate. The positions and sizes come from our template data and have not been checked on a real clear case for every phone. Always compare the printed window with your own case, and use “Measure my case’s opening” if they differ.

My case has a bigger opening than the phone’s camera. What do I do?

Cut to the case opening, so the insert does not show a gap. Measure the opening, choose “Measure my case’s opening” and enter its width, height and position from the left and top edges.

What does the extra room setting do?

It moves the orange cut line outward by the amount you choose on every side of the window. It is useful if you want the lens and flash to be clear of the paper. Leave it at none to cut on the line.

Do I need a hole if my phone has a camera bar or plateau?

Usually not. With a full-width bar the insert can be cut in two pieces above and below it, and with a plateau across the top the insert can stop below it. The template draws the area so you can see where it is.

Can I print only the camera window?

The sheet always prints the full insert, because the window only makes sense in its place. After cutting you can use the insert as a pattern for another one.

Is it free?

Yes, it is free for personal use and needs no account. Everything runs in your browser.

What this tool does not doIt does not know your case’s exact opening: the phone’s camera window is approximate, and case makers differ. It does not cut anything for you, and it does not check that a flash or sensor is uncovered. The preview is not a substitute for a test print: check the 5 cm ruler on your sheet, then try the insert in the case before you trim the final size.

More free tools and guides