iPhone 17 case insert template
The iPhone 17 insert is 71.5 × 149.6 mm (2.81 × 5.89 in) with 11 mm rounded corners. Print it at 100% (Actual size), check the 5 cm ruler, cut just inside the dashed line, cut out the camera window and slide it behind your clear case.
Size and cutout
| Width | 71.5 mm (2.81 in) |
|---|---|
| Height | 149.6 mm (5.89 in) |
| Corner radius | about 11 mm |
| Camera | Tall rounded camera window, about 21 × 39 mm, in the top corner. |
| Fits on | A4 and US Letter, 2 per sheet |
Based on Apple’s published phone dimensions. Clear cases differ by 1 to 2 mm between brands. If the insert bends inside your case, choose Fit: 1 mm smaller in the maker, or measure the inside of your case and use a custom size.
Ready designs for iPhone 17
All ideas
How to make it
- Open the insert maker. Your iPhone 17 is already selected.
- Pick a design, upload a photo or search free photos. Drag and zoom to place it.
- Download the PDF and print at 100% on plain or photo paper.
- Cut the outline, then the camera window (camera-hole guide), and slide it into the case.
Questions
What size is the iPhone 17 case insert?
71.5 × 149.6 mm, which is 2.81 × 5.89 inches, with about 11 mm rounded corners. That is the back of the phone; most clear cases have a window this size or 1 mm smaller.
Why does my printed insert come out too small?
Your printer scaled it. Print again and choose 100%, Actual size or “No scaling” in the print dialog. The 5 cm ruler on the sheet tells you straight away if the scale is right. Step-by-step: print at 100%.
Will the insert block wireless or MagSafe charging?
A single sheet of normal paper does not stop wireless charging. Very thick card or anything metallic can, so avoid foil paper.