Galaxy A15 case insert template
The Galaxy A15 insert is 76.8 × 160.1 mm (3.02 × 6.30 in) with 10 mm rounded corners. Print it at 100% (Actual size), check the 5 cm ruler, cut just inside the dashed line, cut out the camera window and slide it behind your clear case.
Size and cutout
| Width | 76.8 mm (3.02 in) |
|---|---|
| Height | 160.1 mm (6.30 in) |
| Corner radius | about 10 mm |
| Camera | 3 separate round lenses (about 11 mm each) in a vertical row. A hole punch cuts them cleanly. |
| Fits on | A4 and US Letter, 2 per sheet |
Based on Samsung’s published phone dimensions. Clear cases differ by 1 to 2 mm between brands. If the insert bends inside your case, choose Fit: 1 mm smaller in the maker, or measure the inside of your case and use a custom size.
Ready designs for Galaxy A15
All ideas
How to make it
- Open the insert maker. Your Galaxy A15 is already selected.
- Pick a design, upload a photo or search free photos. Drag and zoom to place it.
- Download the PDF and print at 100% on plain or photo paper.
- Cut the outline, then the camera window (camera-hole guide), and slide it into the case.
Questions
What size is the Galaxy A15 case insert?
76.8 × 160.1 mm, which is 3.02 × 6.30 inches, with about 10 mm rounded corners. That is the back of the phone; most clear cases have a window this size or 1 mm smaller.
Why does my printed insert come out too small?
Your printer scaled it. Print again and choose 100%, Actual size or “No scaling” in the print dialog. The 5 cm ruler on the sheet tells you straight away if the scale is right. Step-by-step: print at 100%.
Will the insert block wireless or MagSafe charging?
A single sheet of normal paper does not stop wireless charging. Very thick card or anything metallic can, so avoid foil paper.