iPhone 17 Pro Max case insert template
The iPhone 17 Pro Max insert is 78 × 163.4 mm (3.07 × 6.43 in) with 12 mm rounded corners. Print it at 100% (Actual size), check the 5 cm ruler, cut just inside the dashed line, cut out the camera window and slide it behind your clear case.
Size and cutout
| Width | 78 mm (3.07 in) |
|---|---|
| Height | 163.4 mm (6.43 in) |
| Corner radius | about 12 mm |
| Camera | Full-width camera plateau across the top, about 42 mm tall. The insert starts just below it. |
| Fits on | A4 and US Letter, 2 per sheet |
Based on Apple’s published phone dimensions. Clear cases differ by 1 to 2 mm between brands. If the insert bends inside your case, choose Fit: 1 mm smaller in the maker, or measure the inside of your case and use a custom size.
Ready designs for iPhone 17 Pro Max
All ideas
How to make it
- Open the insert maker. Your iPhone 17 Pro Max is already selected.
- Pick a design, upload a photo or search free photos. Drag and zoom to place it.
- Download the PDF and print at 100% on plain or photo paper.
- Cut the outline, then the camera window (camera-hole guide), and slide it into the case.
Questions
What size is the iPhone 17 Pro Max case insert?
78 × 163.4 mm, which is 3.07 × 6.43 inches, with about 12 mm rounded corners. That is the back of the phone; most clear cases have a window this size or 1 mm smaller.
Why does my printed insert come out too small?
Your printer scaled it. Print again and choose 100%, Actual size or “No scaling” in the print dialog. The 5 cm ruler on the sheet tells you straight away if the scale is right. Step-by-step: print at 100%.
Will the insert block wireless or MagSafe charging?
A single sheet of normal paper does not stop wireless charging. Very thick card or anything metallic can, so avoid foil paper.